PCI BUS-2
1.
A complete transfer operation over the BUS, involving the address and a burst of data is called _____
2.
The device connected to the BUS are given addresses of ____ bit.
3.
The PCI BUS has _____ interrupt request lines.
4.
_____ signal is sent by the initiator to indicate the duration of the transaction.
5.
______ signal is used to enable commands.
6.
IRDY# signal is used for _______
7.
The signal used to indicate that the slave is ready is _____
8.
DEVSEL# signal is used _________
9.
The signal used to initiate device select ________
10.
The PCi BUS allows us to connect _______ I/O devices.